安全島模具主要是應用在我們的高速工程的建設當中，通過該模具生產出來的收費島用于我們的高速

路口當中，該模具整體使用起來比較方便，生產出來的混凝土制塊成型效果非常的好，呈現一個帆狀

，樣式比較獨特。該模具整體生產比較簡單，樣式沒有太多的變化，規格變化可以根據客戶的設計圖

紙來進行定制。The Safe Island mould is mainly used in the construction of our high-speed 

projects. The Toll Island produced by the mould is used in our high-speed intersections. 

The overall use of the mould is relatively convenient, the production of concrete block 

molding effect is very good, showing a sail-shaped, more unique style. The overall 

production of the mold is relatively simple, not too many changes in style, 

specifications can be customized according to the customer’s design drawings.
 
安全島模具是一種組合式的鋼模具，既可以采用現場澆筑的生產方式，也可以采用預制生產的方式來

進行收費島的生產。安全島模具頂端為一個錐形，能夠很好的起到防撞的作用，在車輛撞上收費島的

時候能夠起到較好的緩沖作用，使車輛的速度降下來，并且模具尖端的這個設計也可以使收費站上的

人和駕駛人員更好的觀察到對方，使前方的視野更加開闊。模具一般還會分為島頭以及島尾兩個部分

，在生產的時候需要進行進行組裝使用，比對好安裝的位置之后進行混凝土的澆筑就行，并對其進行

振搗，使內部的漿料充分的凝結在一起，密度增大形成比較**的混凝土制塊就完成生產任務了。 
The mode of production is a modular steel mold that can be either cast on site or 

fabricated to produce a toll island. The top of the safety island mould is a cone, which 

can play a good role in preventing collision, and can play a better buffer role when the 

vehicle hits the toll islan**t the speed of the vehicle will be reduced, and the 

cutting edge of the mold design can also make the toll station and the driver better 

observe each other, so that the front of the field of vision more open. The mould is 

usually divided into two parts: the head of the island and the tail of the island. When 

the mould is manufactured, it needs to be assembled and used. After comparing the 

position of the installation, the concrete can be poured and the mould can be vibrated, 

so that the internal slurry fully condensed together, the density increases to form a 

more perfect concrete block on the completion of the production task

安全島模具制作工藝：安全島模具是根據目前高速公路進出口使用的島頭、島尾以及中間的基礎部分

進行的模具生產，收費島鋼模具的生產一般都是采取現澆的生產作業方式，這樣可以較少二次搬運的

成本。
SAFE ISLAND MOLD MANUFACTURING PROCESS: Safe Island mold is based on the current import 

and export use of the island head, island tail and the middle of the base part of the 

mold production, the charging island steel mold production is generally to take the 

cast-in-place mode of production operations, so that the cost of secondary handling can 

be reduced.